Wrong!

I was watching different sites of all kind of companies and I saw this picture posted inside the home site of one of multiple plumbing companies. This is totally wrong in the Illinois State. They use a normal coupling not a no-share coupling. But this you can see in many places of Chicago land area, if you are you doing sewer replacement.

COMMERCIAL COMPANIES

For companies, plumbing problems are much more than just an inconvenience. They can disrupt business, or worse- force you to temporarily shut down operations. When a problem occurs, wasting time trying to figure out to call is not an option. When you need a partner you can trust to provide, exceptional plumbing service, call  US, BBP PLUMBING INC.

Hot! Very hot!

was 50F in last day of 2011!

Old building, old plumbing

Flush meter 

Leaking every were

Toilet from ice age

The ice age toilet is not flushing because of the flush meter valve which is kind of old. Tried to make this one to work but no way. Will be change next days.

Water heater costs

Typical costs:

Buying a water heater costs $150-$3,500, depending on capacity, energy efficiency and type. Traditional tank systems run about $100-$600 for electric and $250-$1,000 for gas. Tankless types cost $200-$1,200, from a small under-sink unit to one that delivers 5 gallons a minute. Heat pump models are$600-$2,000 or more, and solar water heaters run $1,000-$5,000 (including installation). Weigh the purchase price against the ongoing monthly expenses; the cheapest units are going to be the most expensive ones to use. The U.S. Department of Energy gives detailed descriptions of each type. Installation runs about $200-$400 for a traditional tank model depending on size, existing set-up, fit and other factors; installing a tankless water heater can cost two to four times more if the supply lines or venting need resizing or other significant changes are required; heat pump water heaters cost about $300-$700 to install; and solar systems usually have installation included in the purchase price. It costs more to replace an old-style heater with a different system, but can save money in the long run. What should be included:

Traditionally, two people need a 30-40 gallon capacity tank; five or more in a household calls for 50-80 gallons. But the first-hour rating (how many gallons it delivers in an hour of use) can be more important than capacity; if you buy a tank that puts out more than you need hourly, you're wasting money heating extra water. The on-demand tankless systems avoid that cost and take up less space, but you might need more than one to shower and run a dishwasher at the same time. A heat pump system requires a lot of open space around it in a room that stays warm. Replacing an old water heater with a similar but updated model is relatively straightforward, but be sure to check the dimensions. New more-energy efficient units are often a bit larger, and might not fit the existing space. And be sure you're clear on the space and hook-ups available in your home, as compared to the requirements of a more energy-efficient style of water heater. Always call a plumber to install a water heater.

TIPS(1)

What do you have to do if you discover a floor drain in the basement, under the carpet, after you recently move in the house, and this one is getting really stinky and making the basement a no standing zone!?

Answer: There might be a partially clogged drain, collapsed drain. A good cleaning with a hose usually does the trick. Can be cap it with a test plug if is OK. But the best way is camera inspection with a mini camera and see if is still connected with main sewer line or with a sump pump pit. Either way is better first to see what will be in the future the room destination and for how many years, and make the decision after you consult a plumber.

end of july

mingo fall